? 2010 ixys corporation, all rights reserved symbol test conditions maximum ratings v dss t j = 25 c to 150 c -150 v v dgr t j = 25 c to 150 c, r gs = 1m -150 v v gss continuous + 15 v v gsm transient + 25 i d25 t c = 25 c -10 a i dm t c = 25 c, pulse width limited by t jm - 30 a i a t c = 25 c -10 a e as t c = 25 c 200 mj p d t c = 25 c83w t j -55 ... +150 c t jm 150 c t stg -55 ... +150 c t l 1.6mm (0.062 in.) from case for 10s 300 c t sold plastic body for 10s 260 c m d mounting torque (to-220) 1.13 / 10 nm/lb.in. weight to-252 0.35 g to-263 2.50 g to-220 3.00 g ds100290(10/10) symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. bv dss v gs = 0v, i d = - 250 a -150 v v gs(th) v ds = v gs , i d = - 250 a - 2.0 - 4.5 v i gss v gs = 15v, v ds = 0v 50 na i dss v ds = v dss , v gs = 0v - 3 a t j = 125 c -100 a r ds(on) v gs = -10v, i d = 0.5 ? i d25 , note 1 350 m trenchp tm power mosfet p-channel enhancement mode avalanche rated ixty10p15t IXTA10P15T ixtp10p15t v dss = -150v i d25 = -10a r ds(on) 350 m features z international standard packages z avalanche rated z extended fbsoa z fast intrinsic diode z low r ds(on) and q g advantages z easy to mount z space savings z high power density applications z high-side switching z push pull amplifiers z dc choppers z automatic test equipment z current regulators z battery charger applications g = gate d = drain s = source tab = drain to-252 (ixty) g s d (tab) to-263 aa (ixta) g s d (tab) g d s to-220ab (ixtp) d (tab) advance technical information
ixys reserves the right to change limits, test conditions, and dimensions. ixty10p15t IXTA10P15T ixtp10p15t ixys mosfets and igbts are covered 4,835,592 4,931,844 5,049,961 5,237,481 6,162,665 6,404,065 b1 6,683,344 6,727,585 7,005,734 b2 7,157,338b2 by one or more of the following u.s. patents: 4,850,072 5,017,508 5,063,307 5,381,025 6,259,123 b1 6,534,343 6,710,405 b2 6,759,692 7,063,975 b2 4,881,106 5,034,796 5,187,117 5,486,715 6,306,728 b1 6,583,505 6,710,463 6,771,478 b2 7,071,537 note 1: pulse test, t 300 s, duty cycle, d 2%. symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. g fs v ds = -10v, i d = 0.5 ? i d25 , note 1 5 9 s c iss 2210 pf c oss v gs = 0v, v ds = - 25v, f = 1mhz 146 pf c rss 43 pf t d(on) 19 ns t r 16 ns t d(off) 40 ns t f 12 ns q g(on) 36 nc q gs v gs = -10v, v ds = 0.5 ? v dss , i d = 0.5 ? i d25 12 nc q gd 8 nc r thjc 1.5 c/w r thcs to-220 0.50 c/w source-drain diode symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. i s v gs = 0v -10 a i sm repetitive, pulse width limited by t jm - 40 a v sd i f = i s , v gs = 0v, note 1 -1.3 v t rr 120 ns q rm 530 nc i rm - 9 a resistive switching times v gs = -10v, v ds = 0.5 ? v dss , i d = 0.5 ? i d25 r g = 5 (external) i f = 0.5 ? i d25 , -di/dt = -100a/ s v r = - 100v, v gs = 0v pins: 1 - gate 2 - drain 3 - source to-220 outline to-263 outline 1. gate 2. drain 3. source 4. drain bottom side dim. millimeter inches min. max. min. max. a 4.06 4.83 .160 .190 b 0.51 0.99 .020 .039 b2 1.14 1.40 .045 .055 c 0.40 0.74 .016 .029 c2 1.14 1.40 .045 .055 d 8.64 9.65 .340 .380 d1 8.00 8.89 .280 .320 e 9.65 10.41 .380 .405 e1 6.22 8.13 .270 .320 e 2.54 bsc .100 bsc l 14.61 15.88 .575 .625 l1 2.29 2.79 .090 .110 l2 1.02 1.40 .040 .055 l3 1.27 1.78 .050 .070 l4 0 0.13 0 .005 advance technical information the product presented herein is under development. the technical specifications offered are derived from a subjective evaluation of the design, based upon prior knowledge and experience, and constitute a "considered reflection" of the anticipated result. ixys reserves the right to change limits, test conditions, and dimensions without notice. to-252 outline pins: 1 - gate 2,4 - drain 3 - source dim. millimeter inches min. max. min. max. a 2.19 2.38 0.086 0.094 a1 0.89 1.14 0.035 0.045 a2 0 0.13 0 0.005 b 0.64 0.89 0.025 0.035 b1 0.76 1.14 0.030 0.045 b2 5.21 5.46 0.205 0.215 c 0.46 0.58 0.018 0.023 c1 0.46 0.58 0.018 0.023 d 5.97 6.22 0.235 0.245 d1 4.32 5.21 0.170 0.205 e 6.35 6.73 0.250 0.265 e1 4.32 5.21 0.170 0.205 e 2.28 bsc 0.090 bsc e1 4.57 bsc 0.180 bsc h 9.40 10.42 0.370 0.410 l 0.51 1.02 0.020 0.040 l1 0.64 1.02 0.025 0.040 l2 0.89 1.27 0.035 0.050 l3 2.54 2.92 0.100 0.115
? 2010 ixys corporation, all rights reserved ixty10p15t IXTA10P15T ixtp10p15t fig. 1. output characteristics @ t j = 25oc -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 -3 -2.5 -2 -1.5 -1 -0.5 0 v ds - volts i d - amperes v gs = -10v - 8v - 5 v - 6 v - 7 v fig. 2. extended output characteristics @ t j = 25oc -40 -35 -30 -25 -20 -15 -10 -5 0 -30 -25 -20 -15 -10 -5 0 v ds - volts i d - amperes v gs = -10v - 9v - 5 v - 6 v - 7 v - 8 v fig. 3. output characteristics @ t j = 125oc -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 -5.5 -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 v ds - volts i d - amperes v gs = -10v - 8v - 7v - 6v - 5v - 4v fig. 4. r ds(on) normalized to i d = - 5a vs. junction temperature 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 -50-25 0 255075100125150 t j - degrees centigrade r ds(on) - normalized v gs = -10v i d = -10a i d = - 5a fig. 5. r ds(on) normalized to i d = - 5a vs. drain current 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 -35 -30 -25 -20 -15 -10 -5 0 i d - amperes r ds(on) - normalized v gs = -10v t j = 25oc t j = 125oc fig. 6. maximum drain current vs. case temperature -12 -10 -8 -6 -4 -2 0 -50 -25 0 25 50 75 100 125 150 t j - degrees centigrade i d - amperes
ixys reserves the right to change limits, test conditions, and dimensions. ixty10p15t IXTA10P15T ixtp10p15t fig. 7. input admittance -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 v gs - volts i d - amperes t j = 125oc 25oc - 40oc fig. 8. transconductance 0 2 4 6 8 10 12 14 16 18 20 -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 i d - amperes g f s - siemens t j = - 40oc 25oc 125oc fig. 9. forward voltage drop of intrinsic diode -30 -25 -20 -15 -10 -5 0 -1.1 -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 v sd - volts i s - amperes t j = 125oc t j = 25oc fig. 10. gate charge -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 0 4 8 12162024283236 q g - nanocoulombs v gs - volts v ds = - 75v i d = - 5a i g = -1ma fig. 11. capacitance 10 100 1,000 10,000 -40 -35 -30 -25 -20 -15 -10 -5 0 v ds - volts capacitance - picofarads f = 1 mh z c iss c rss c oss fig. 12. forward-bias safe operating area 0.1 1 10 100 1 10 100 1,000 v ds - volts i d - amperes t j = 150oc t c = 25oc single pulse 25s 1ms 100s r ds(on) limit 10ms dc - - - --- - 100ms -
? 2010 ixys corporation, all rights reserved ixty10p15t IXTA10P15T ixtp10p15t fig. 14. resistive turn-on rise time vs. drain current 13 14 15 16 17 18 -10 -9.5 -9 -8.5 -8 -7.5 -7 -6.5 -6 -5.5 -5 i d - amperes t r - nanoseconds r g = 5 ? , v gs = -10v v ds = - 75v t j = 25oc t j = 125oc fig. 15. resistive turn-on switching times vs. gate resistance 0 5 10 15 20 25 30 35 40 45 5 10152025 r g - ohms t r - nanoseconds 0 5 10 15 20 25 30 35 40 45 t d ( on ) - nanoseconds t r t d(on) - - - - t j = 125oc, v gs = -10v v ds = - 75v i d = -10a, - 5a fig. 16. resistive turn-off switching times vs. junction temperature 10.5 11.0 11.5 12.0 12.5 13.0 13.5 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t f - nanoseconds 32 34 36 38 40 42 44 t d ( off ) - nanoseconds t f t d(off) - - - - r g = 5 ? , v gs = -10v v ds = - 75v i d = - 5a i d = - 10a fig. 17. resistive turn-off switching times vs. drain current 33 34 35 36 37 38 39 40 41 -10 -9.5 -9 -8.5 -8 -7.5 -7 -6.5 -6 -5.5 -5 i d - amperes t f - nanoseconds 10.4 10.8 11.2 11.6 12.0 12.4 12.8 13.2 13.6 t d ( off ) - nanoseconds t f t d(off) - - - - r g = 5 ? , v gs = -10v v ds = - 75v t j = 125oc t j = 25oc fig. 13. resistive turn-on rise time vs. junction temperature 13 14 15 16 17 18 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t r - nanoseconds r g = 5 ? , v gs = -10v v ds = - 75v i d = - 5a i d = -10a fig. 18. resistive turn-off switching times vs. gate resistance 0 10 20 30 40 50 5 10152025 r g - ohms t f - nanoseconds 20 30 40 50 60 70 t d ( off ) - nanoseconds t f t d(off) - - - - t j = 125oc, v gs = -10v v ds = - 75v i d = - 5a, -10a
ixys reserves the right to change limits, test conditions, and dimensions. ixty10p15t IXTA10P15T ixtp10p15t ixys ref: t_10p15t(a1)10-18-10 fig. 19. maximum transient thermal impedance 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 pulse width - seconds z (th)jc - oc / w
|
